Multi Channel Load Manager - Power Distribution Unit / System
A multi channel load manager that provides 3 channel or 9 channel single phase electrical information and is available in two
different constructions (96x96mm panel meter or 90x90mm Din Rail).
A technological wonder that provides
the customer with 3 times faster data communication to the SCADA/Energy Management Software, saves
critical panel space, reduces cabling and best of all reduces the cost of the panel substantially.
can be cascaded to measure multiple channels with a maximum of 15 channels in a series with common
display unit making up the Power Distribution System (PDS).
The system also allows the user to have multiple
meters placed in the panel with a single display unit placed at a remote location.
For remote reading and control, the PDU is supported by ElNet
Software, designed for remote setup and data viewing and
Building Management System: With the open modbus protocol,
the PDU can interface any system, such as building management,
Communication : RS485 interface, Industry standard Modbus RTU protocol (RS232 optional), Baud rate: 1200 bps to 19200 bps. (Preferred 9600 bps), Isolation : 2000 volts AC isolation for 1 minute between communication and other circuits.
Weight : Unpacked: 300 gms, Packed: 400 gms
Mechanical Specification : Dimension Bezel: 96 × 96 mm (Depth 50mm behind bezel behind panel mounting), 90 × 90 mm for Din Rail.
18 months warranty
Individual phase kWh measurement provides user flexibility of
measuring 3 phase 3 channels or single phase 9 channels
Primary current can be independently configured making it ideal
for any kind of industry or up-gradation
Standard communication Platforms: Modbus RTU
Displays more than 25 parameters Basic, Power and
OLD register to store the previously cleared Energy value